>&Product Category
>Electroplating (silver) paint, metallic effect water-based paint series, imitation enamel paint, imitation glaze paint series, wood products and tea tray matching special paint series, flat glossy paint series
>
>Color Essence Series Color Paste Series Pearlescent Paste Series Metallic Pigment Series
>
>Glitter Powder Series Pearlescent Powder Pigment Series Gold Powder Series Varnish Series Long-lasting Luminous Powder
>
>Other categories: gold and silver copper foil paper and various special series, antique oil, oil paint, turpentine, Tianna water, crystal glue, additive series, etc.
>Rust lacquer series operation process
> In view of This product is relatively special, so it must be operated in the following ways
> The required substrates should be treated accordingly. For example: iron substrates must be surface-cleaned first to remove rust and oil stains, and other substrates ( For example: wood, < =bb.r///%B%D%%.hr=_b >plastic
, etc.) also need surface treatment before priming can be applied.
> The treated substrate is then treated with primer, and sprayed (or brushed) according to different materials. For example: iron substrate needs to be sprayed with corresponding varnish, and other materials that are best for baking paint also need to be sprayed with corresponding varnish. Spray the corresponding base oil.
> After the primer of the substrate is dry, brush or spray the rust paint on the surface (the preparation of the rust paint is such as: main agent: curing agent B=:, it must be calculated strictly according to the weight, and it must be fully Stir evenly before painting the surface of the product substrate).
> After completing the above work, leave it for an hour. The product will reflect the original color effect of rust. If the rust color is not enough due to weather or other reasons, the curing agent can be applied to the surface again by brushing or spraying. , the original rust color can be enhanced after a few hours, and the effect will be better.
> If your product is an outdoor product, it is best to spray a layer of outdoor sun-resistant matte (similar color to rust) varnish on the rust-colored surface. To protect.
>&The above operation process is optimal when the working environment temperature is between ℃. If the temperature difference between the upper and lower temperatures is large, the corresponding formula of the product needs to be readjusted before operation.
small/>
Water-based paint manufacturer specializes in water-based paint production of imitation rust paint iron plate process rust paint